Sabtu, 26 Januari 2013

Shipka

 
Shipka SMG in 9x18 Makarov.

Characteristics

Caliber: 9x18mm Makarov; 9x19mm Luger/Para
Weight: 2.0 - 2.2 kg withouth magazine
Lenght (stock closed/open): 338 / 625 mm
Barrel lenght: 150 mm
Rate of fire: 700 rounds per minute
Magazine capacity: 32 rounds (25 rounds for 9x19mm)
Effective range: 150 meters

The "Shipka" SMG was developed by Bulgarian company ARSENAL for police and military use, and currently is offered for export. It appeared on the market circa 1996. According to some sources, it is used by Bulgarian police and security forces.
"Shipka" (named after historical place in Bulgaria) is a straightforward design, using simple blowback operation and firing from open bolt. The lower receiver along with pistol grip and triggerguard is made from polymer, the upper receiver is made from steel. Simple buttstock is made from steel wire and folds to the left side of gun.

FN P90 personal defense weapon

FN P90 personal defense weapon / submachine gun in basic configuration, left side.
FN P90 personal defense weapon / submachine gun in basic configuration, left side.
 
FN P90 personal defense weapon / submachine gun in basic configuration, right side.
FN P90 personal defense weapon / submachine gun in basic configuration, right side.
 
FN P90 TR (triple rail version) personal defense weapon / submachine gun, with installed accessories including optical sight on top rail, flashlight on left rail, and silencer on the barrel.
FN P90 TR (triple rail version) personal defense weapon / submachine gun, with installed accessories including optical sight on top rail, flashlight on left rail, and silencer on the barrel.
 
FN PS90 - a civilian semi-automatic only version of P90 with long barrel.
FN PS90 - a civilian semi-automatic only version of P90 with long barrel.
 
Bottom view on the filed FN P90 magazine, showing position of the stored cartridges and cartridge in feed position.
Bottom view on the filed FN P90 magazine, showing position of the stored cartridges and cartridge in feed position.
 
FN P90 partially disassembled.
FN P90 partially disassembled.

Characteristics

Caliber: 5.7x28mm SS190
Weight: 2.54 kg empty; 3 kg loaded with magazine with 50 rounds
Length: 500 mm
Barrel length: 263 mm
Rate of fire: 900 rounds per minute
Magazine capacity: 50 rounds
Effective range: 200 meters

The FN P90 submachine gun (SMG) was developed in the late 1980s as a personal defense weapon for the troops whose primary activities does not include small arms, such as vehicle and tank crew members, artillery crews etc. Standard pistols and submachine guns chambered for pistol rounds were proved ineffective against enemy soldiers, wearing body armor; Therefore FN designers first developed a new round with enhanced penetration, initially known as SS90. To achieve necessary high penetration while keeping recoil impulse low, FN used a small-bore approach, creating a round that looked much like the scaled down 5,56NATO round. It must be noted that similar concepts were tried in other countries, most notably in USA, several decades before FN; for example, US Army tested M1 carbines chambered for .221 Johnson Spitfire round back in late 1950s; later on, Colt produced its .22 SCAMP and 5,6x30 MARS ammunition for special SCAMP machine pistol and MARS "mini assault rifle" (a scaled-down M16 rifle) respectively. It must be noted that 5,6x30 MARS round was in a sense a direct predecessor to 5,7x28 FN SS90 round, although the latter featured slightly lighter and faster bullet. By late 1980s a concept of a small-bore, low-impulse "personal defense weapon" (PDW) with good accuracy and lethality at ranges of up to 200-250 meters was well established, although there were no weapons adopted for service yet. FN decided to follow this concept and to create its own PDW using clean sheet approach. Basic ideas used for this development, designated as "Project 9.0", included the following: minimal size and weight of weapon; large magazine capacity; complete ambidexterity; ease of use and maintenance.
To save on size and weight, FN designers put new weapon into compact and lightweight stock of bullpup layout, made of impact-resistant polymer. The high-capacity magazine also was made from semi-translucent polymer, and holds 50 rounds in two rows. To made loaded weapon as compact as possible, FN designers followed the idea of American designer Hall, and placed the magazine above the barrels, with cartridges stored in horizontal position with bullets pointing to the left. While Hall system employed a rotary feed unit, operated by the bolt, to put new cartridge in line with the barrel, FN designers incorporated a stationary helical ramp into each magazine, which rotates cartridge for 90 degrees prior to placing it into feed lips. Complete ambidexterity was achieved by using ambidextrous controls (including dual charging handles and dual back-up open sights), and bottom ejection. Finally, simplicity of aiming was achieved by use of integral reflex type collimating sight and integral laser aiming module (LAM).
Resulting weapon appeared in around 1990 as FN P90 personal defense weapon, along with improved 5,7x28 SS190 ammunition, which replaced polymer-cored bullets with heavier dual-core (steel / aluminum) bullets with better penetration against body armor. Several other types of ammunition were developed for this weapon, including tracer, subsonic ball and soft-core training ball.
First sales of P90 were made to Saudi Arabia in early 1990s; today it is believed that FN sold more than 20 000 of P90's to a wide variety of law enforcement agencies and military special operation units worldwide, including US Secret Service, Austrian Army rangers, Dutch BBE special operations forces, Belgian Army and others. Most interesting fact about adoption of P90 is that so far it has been adopted for the role, directly opposite to its original niche of "personal defense weapon". In fact, most services and agencies that adopted P90 use it for offensive roles, as a specialist or even a primary weapon for various assault teams, and other "professional small-arms users", as opposed to military personnel which primary functions do not include use of small arms.
In around 1995 FN supplemented the P90 with pistol, firing the same 5,7x28 ammunition, designated as FN Five-seveN. Recently, FN also introduced a civilian version of P90, designated as PS90 carbine. This is a self-loading weapon with longer barrel (408 mm / 16").
FN P90 personal defense weapon is blowback operated, selective-fired weapon which fires from closed bolt. The firing is controlled by a removable trigger unit with conventional hammer. A manual safety is located directly below the trigger. Magazine lies at the top of the weapon, feeding from front-to-back, with spiral ramp built into the "rear" part of the magazine. Spent cartridges are ejected straight down through the chute, which exits just behind the pistol grip. The standard sighting equipment includes a non-magnifying collimating sight with "ring and dot" illuminated aiming reticule. Back-up open sights are provided at either side of the primary collimating sight. The so-called P90 USG version is provided with two additional Picatinny rails at either side of the collimating sight base; FN also offers a version with no standard sighting equipment; user has to make its own choice of day and/or night sights and additional equipment, which can be installed on three Picatinny rails - top, left and right. This version is designated as P90 TR (triple rail). The front part of the forward handgrip on P90 is shaped as hand protector, and it can contain integral laser aiming module, which sends either visible or IR laser beam to mark the intended target. For special missions P90 can be fitted with a special silencer, which is used in conjunction with special subsonic ammunition.

Vigneron M2

Vigneron M2 submachine gun, right side.
Vigneron M2 submachine gun, right side.
 
Vigneron M2 submachine gun, left side.
Vigneron M2 submachine gun, left side.

Characteristics

Caliber 9x19mm Luger / Parabellum
Weight 3,28 kg empty
Length (stock closed/open) 695 / 872 mm
Barrel length 300 mm
Rate of fire 620 rounds per minute
Magazine capacity 32 rounds
Effective range 100 meters

The Vigneron submachine gun was developed during early fifties by the officer of the Belgian army and produced by Belgian company Precision Liegoise SA. It was adopted by Belgian army in 1953, and saw some combat in then-Belgian Congo. Vigneron submachine gun was quite conventional in design and appearance, and not much more can be told about this weapon.
Vigneron submachine gun is blowback operated, selective fired weapon which fires from open bolt. Fire mode selector / safety switch is located on the left side of the grip, just behind the trigger. It is interesting that in full automatic mode short pull on the trigger will still, produce single shots, and only a long pull will produce full automatic fire. Additional automated safety is built into the backstrap of the pistol grip. Cocking handle is located on the left side of the receiver, and is stationary when gun is fired. Ejection port has a spring-loaded dust cover. Barrel is relatively long and has two ports just behind the front sight base, which serve as a muzzle rise compensator. Sights are fixed, with rear aperture set for 50 meters range. Stock is made from steel wire and is retractable, with several positions so shooter can adjust it to his own preferences.

K6-92 / Borz

K6-92 / Borz submachine gun.
K6-92 / Borz submachine gun.

Characteristics

Caliber 9x18 Makarov PM
Weight 1.96 kg
Length (stock closed/open) 370 / 700 mm
Barrel length 150 mm
Rate of fire ? rounds per minute
Magazine capacity 17, 25 or 30 rounds

The K6-92 submachine gun was developed during early 1990s in the republic of Armenia, which gained its independence in 1991 after the fall of the Soviet Union. At the time Armenia was engaged in the local conflict with Azerbaijan (another ex-USSR republic), and was in desperate need for small arms. The submachine gun is one of the simplest automatic arms to design and manufacture, so Armenian engineers quickly developed a straightforward weapon, which can be easily manufactured by almost any mechanical workshop.
Later on, more than few K6-92 submachine guns made its way through the borders into the Chechen republic, the most turbulent part of the Russia. During mid-1990s Chechnya was heavily infested with separatists, Islamic extremists and other kinds of bandits, which found submachine guns to be convenient weapons for urban fighting. Separatist Chechen government attempted to produce a "local" copy of the K6-92 at one of machine-building factories in the city of Groznyj, but very few were made there due to production problems and quality issues. Chechen-made copies of the K6-92 submachine gun are usually referred to as "Borz" (which means "wolf" in Chechen language). It also must be noted, however, that underground workshops, run by separatist forces, also made some "generic" crudely made submachine guns, generally known under the same name (Borz). These "homemade" submachine guns can be distinguished by tubular receiver and extremely poor fit and finish. Overall, the K6-92 submachine guns are reported as crude arms, suitable mostly for close combat. Over last two decades, plenty of these submachine guns turned up in Russia and other former USSR states during various crimes of violence and illegal arms trafficking.
The K6-92 submachine gun is a simple blowback operated weapon  that fires from open bolt. Receiver is made from steel stampings, welded together. Cocking handle is located at the top, safety / fire mode selector is located at the left side of the gun, above the trigger guard. Gun can be fired in single shots or in full automatic. It is fitted with plastic pistol grip and a top-folding metallic buttstock.

Steyr AUG Para 9mm

Steyr AUG A1 Para 9mm submachine gun, original version.
Steyr AUG A1 Para 9mm submachine gun, original version.
 
Steyr AUG A3 XS 9mm submachine gun.
Steyr AUG A3 XS 9mm submachine gun.

Characteristics

Data for current production Steyr AUG A3 XS submachine gun
Caliber
 9x19mm Luger/Parabellum
Weight 3,0 kg empty
Length 610 mm
Barrel length: 325 mm
Magazine capacity 25 rounds
Rate of fire ~700 rounds/minute

The original Steyr AUG Para 9mm submachine gun is a reversible conversion of the original Steyr AUG assault rifle, intended mostly for short-range police and special operations work. This weapons combines relatively compact dimensions with very good accuracy (compared with other 9mm submachine guns), thanks to a long barrel and closed-bolt firing. If necessary, Steyr AUG 9mm submachine gun also can be fitted with silencer.
Steyr AUG Para 9mm submachine gun utilizes basic components (aluminum receiver and polymer stock of bullpup configuration) from the Steyr AUG assault rifle. The 9mm barrel is installed (original Steyr AUG assault rifles have quick detachable barrels), and a gas-operated locked bolt action is replaced with simple blowback (unlocked) bolt. Original firing system with hammer and pull-through selective trigger (short pull results in single shots, long pull - in full automatic fire) is retained, and a special magazine adapter is installed into the magazine housing. Depending on the basic version of the Steyr AUG assault rifle, which is used for conversion, 9mm version will retain its parent sighting equipment - 1.5X telescope sight in A1 version of Picatinny rail with optional open or optical sights in A2 and A3 versions.

Steyr TMP

Steyr TMP.
Steyr TMP. 
 
Characteristics

Caliber: 9x19mm Luger/Parabellum
Weight: 1,3 kg empty
Length: 282 mm
Rate of fire: 800-900 rounds per minute
Magazine capacity: 15 or 30 rounds

Steyr TMP is a modern compact SMG. It is blowback operated, locked breech design, with rotating barrel. This mean that after the shot bolt with barrel locked to it are moving backward for some 4 millimeters. Then, the barrel rotates clockwise slightly, and thus unlocks the bolt. Rotaton controls via small cam on the barrel that follows the spiral groove inside the receiver.
Both upper and lower receiver are made from polymer. TMP has no stock and could be fired only from off-hand position.
Safeties featured automatic off-battery safety, drop safety and the manual safety switch.
TMP is reported as a very controllable and comfortable to fire firearm.

Steyr MPi 69 and MPi 81

Steyr MPi 69 submachine gun.
Steyr MPi 69 submachine gun.
 
Steyr MPi 81 submachine gun; note added cocking handle that replaced sliding front sling swivel of MPi 69.
Steyr MPi 81 submachine gun; note added cocking handle that replaced sliding front sling swivel of MPi 69.
 
Characteristics

Caliber: 9x19mm Luger/Para
Weight: 3.13 kg empty
Length (stock closed/open): 465 / 670 mm
Barrel length: 260 mm
Rate of fire: 550 rounds per minute
Magazine capacity: 25 or 32 rounds
Effective range: 100-150 meters

The Steyr MPi 69 submachine gun was developed by Austrian company Steyr-Daimler-Puch during early sixties and put into production; in around 1981 the basic design was slightly improved with addition of a conventional bolt cocking handle. The updated version was designated as MPi 81 and was manufactured until about mid-1990s. Both versions are in use by several police and military forces in Europe and elsewhere.
Steyr MPi 69 submachine gun is a blowback operated, selective fire weapon that fires from open bolt. The receiver is made from stamped steel, the receiver cover and pistol grip are made from nylon. The bolt is of "wrap-around" type (most of its weight is located in front of the breech face, around the barrel) and had a fixed firing pin. The cocking handle on MPi 69 is combined with front sling swivel; to cock the bolt, shooter has to pull the front part of the sling rearward and then release it. On MPi 81 submachine gun, this system is replace by conventional bolt cocking handle. Both MPi 69 and MPi 81 had cross-bolt button manual safety, located above the trigger. The fire mode selection mechanism is a combination of the trigger pull and safety button. If the safety button is pushed all the way to the left, the short pull on the trigger will produce single shots, and the long pull will produce burst firing. If the safety button will be left in mid-way position, only single shots will be possible. If the safety is all the way to the right, the gun is set to safe and will not fire.
Sights consist of protected front and flip-up type rear. The shoulder stock is retractable and made from steel wire.

Steyr - Solothurn S1-100 / MP-34

Steyr MP-34 submachine gun, left side.
Steyr MP-34 submachine gun, left side.
 
Steyr MP-34 submachine gun, right side.
Steyr MP-34 submachine gun, right side.
 
Steyr MP-34 partially disassembled.
Steyr MP-34 partially disassembled.
 
Drawing from original patent, covering S1-100 integral magazine loading device.
Drawing from original patent, covering S1-100 integral magazine loading device.
 
Characteristics
 
Caliber 9x19mm Luger / Parabellum, 9x23 Steyr, 9x25 Mauser Export
Weight 4,25 kg empty
Length 850 mm
Barrel length 200 mm
Rate of fire 400-500 rounds per minute
Magazine capacity 32 rounds
Effective range 150-200 meters

The story of this weapon start in around 1919, when German arms-making company Rheinmetall produced a prototype submachine gun designated MP.19. This weapon was developed by Lous Stange to same specifications as Schmeisser'sMP.18/I, but MP.19 came too late to see any action during WW1. After the end of WW1, Germany was severely limited in design and production of small arms by treaty of Versailles. When Hitler came into power, German military-oriented companies began to move the R&D outside of Germany to avoid treaty limitations. In 1929, Rheinmetall purchased the small Swiss-based company Wafenfabrik Solothurn, which was used to finalize some Rheinmetall small arms which were developed under secrecy in Germany. One of those weapons was an improved version of MP.19 submachine gun, which was announced by Waffenfabrik Solothurn under company index "S1-100". This was an excellent weapon, reliable, controllable and accurate, but Solothurn company lacked production capabilities. To make guns on industrial scale, Solothurn teamed with famous Austrian gun-making company Waffenfabrik Steyr, and formed trade company Steyr-Solothurn Waffen AG in Zurich, Switzerland. This company sold weapons designed by Rheinmetall and Solothurn and made by Steyr, and S1-100 submachine gun was among first products of this international conglomerated. In the 1930 Austrian police adopts the S1-100 as Steyr MP.30, chambered for standard Austrian 9x23 Steyr pistol cartridge. It was also exported to Chile, Bolivia, Uruguay and El Salvador; it also was sold in limited numbers to China, in 7,63x25 Mauser caliber. Portugal adopted the S1-100 in 7,65x22 Luger caliber in 1938, and in 1942 purchased more S1-100's from Steyr but this time in 9x19 Luger. For South American markets, Steyr produced version of S1-100 in .45ACP caliber; this version was distinguished by additional pistol grip under the forearm. Austrian army adopted the S1-100 as Steyr MP.34, chambered for powerful 9x25 Mauser ammunition. When Hitler's Germany occupied Austria in 1938, it quickly consumed most of Austrian MP.30's and MP.34's, and after rebarreling to 9x19 ammunition these weapons were issued to German troops as MP.34(ö). Production of Steyr-Solothurn submachine guns has ceased in around 1940, when, under German administration, it was replaced in production at Steyr by much simpler and less expensive MP-40 submachine gun of German design. It must be noted that S1-100 was one of the finest submachine guns made prior to WW2, and probably one of most expensive.
Steyr-Solothurn S1-100 submachine gun was blowback operated, selective-fired weapon which fired from open bolt. Unlike most other submachine guns, the return spring was located in the buttstock and was linked to bolt via long push-rod, pivotally attached to the rear of the bolt. The basic action of the gun was accessible through the top cover, which was hinged at the front and opened up and forward to expose bolt and trigger unit below it. The fire mode selector was made in the form of a sliding switch, located at the left side of the stock. Early guns had Schmeisser-style bolt-locking safety in the form of hook-shaped cut which was used to engage the bolt handle when bolt was cocked. Later on, additional manual safety was added to the top cover, in front of the rear sight. this safety locked bolt either in cocked or closed position. The feed was from left side, with magazine housing slightly canted forward for more positive feeding Ejection was to the right. The magazine housing had an unusual magazine filler device, with slots for magazine at the bottom and for stripper clip - at the top. removed magazine was inserted into this device from the bottom, and then shooter placed stripper clips into the top of device and pushed cartridges down into magazine. Four standard 8-round clips were required to fill the magazine.
All S1-100 guns were fitted with wooden stock with semi-pistol grip. Barrel was enclosed into perforated jacket, which had provisions for mounting a bayonet. Sights included hooded front and tangent type rear, marked from 100 to 500 meters. One most unusual accessory, which was briefly advertised for S1-100 during mid-1930s, was a compact machine-gun type tripod, which was to provide additional stability for weapon when firing from ground. It seems that this tripod was never made in quantity.

Halcon ML-63

Halcon ML-63 submachine gun.
Halcon ML-63 submachine gun.

Characteristics

Caliber 9x19mm Luger / Parabellum
Weight 3.6 kg
Length (stock closed/open) 500 / 690 mm
Barrel length 170 mm
Rate of fire 600 rounds per minute
Magazine capacity 20 or 42 rounds

Halcon ML-63 submachine gun (Pistola ametralladora Halcón, Modelo Liviano 1963) was developed in 1963 by Argentinean arms-making company Fabrica de Armas Halcon. This weapon saw extensive use by Argentinean armed forces during conflict with Great Britain over Falkland islands. It was also used by Argentinean police until early 1990s.
Halcon ML-63 submachine gun is a simple blowback weapon that fires from closed bolt.It has a sliding "hammer' or striker, which is cocked when bolt closes, and is released when trigger is pressed. It has dual trigger setup, which allows to fire either single shots (front trigger) or full automatic (rear trigger). Charging handle is located on the right side and moves along with the bolt. Weapon is manufactured mostly from steel stampings, and fitted with plain barrel that has a massive muzzle compensator. Magazine housing is extended to provide comfortable forward grip for non-firing hand.  Halcon ML-63 submachine gun was usually equipped with simple telescoping buttstock, made of steel wire, although it can be replaced with detachable fixed wooden butt. Standard iron sights feature L-shaped flip-up rear sight with settings for 50 and 100 meters range.

Halcon M/943

Halcon M/943 submachine gun.
Halcon M/943 submachine gun.

Characteristics

Caliber .45ACP
Weight 4.05 kg
Length 850 mm
Barrel length 292 mm
Rate of fire 700 rounds per minute
Magazine capacity 17 or 30 rounds

Halcon M/943 submachine gun (Pistola ametralladora Halcón, modelo 1943) was developed by Argentinean arms-making company Fabrica de Armas Halcon. It was manufactured for Argentinean army and police; lighter and more compact variant of the same weapon was manufactured as Halcon M/946 for Argentinean Air Forces (Carabina ametralladora Halcón, modelo Aeronáutica Argentina 1946). This weapon is rarely encountered outside of South America.
The Halcon M/943 submachine gun is a simple blowback weapon that fires from open bolt. Weapon can fire single shots and full automatic, thanks to the fire mode selector, located on the left side above the trigger. Charging handle is also located on the left side and does not move when gun is fired. Halcon M/943 submachine gun is fitted with heavily finned barrel and a massive muzzle compensator, and has a wooden pistol grip / buttstock of peculiar shape. The Halcon M/946 submachine gun was similar in design except that it had a shorter barrel and a MP40-type underfolding buttstock.

FMK-3

FMK-3 (Argentina)
 
 
Characteristics

Caliber: 9x19mm Luger/Para
Weight: 3.40 kg empty
Lenght (stock closed/open): 523 / 693 mm
Barrel lenght: 290 mm
Rate of fire: 650 rounds per minute
Magazine capacity: 25, 32 and 40 rounds
Effective range: 100 meters

The FMK-3 submachine gun was developed by Fabricaciones Militares company of Argentina circa 1974 and is being manufactured by Small Arms factory of Domingo Matheu. It is used by Army and Police of Argentina, and also, in semi-automatic version is sold to civilians under the name of FMK-5.
FMK-3 is a blowback-operated, selective fire submachine gun. It uses telescoped bolt, that sleeves around the rear part of the barrel when closed. Double stak magazine is inserted into the pistol grip. Receiver and pistol grip is made from steel stampings, safety/fire selector switch is located at the left side of the weapon above the pistol grip. There also is an automated grip safety at the rear of the pistol grip. The sights are of flip-up type with "L"-shaped rear sight blade, marked for range of 50 and 100 meters. The retractable buttstock is made from steel wire.
It is said that FMK-3 is quite comfortable to use and accurate in full-auto, putting all hits into 125 mm (5 inches) groups when firing offhand at 50 meters (short bursts, obviously).
Thanks to Alejandro Albertengo from Argentina for information.

Sarsilmaz ST10

Sarsilmaz ST10 pistol (Turkey)
 


Type Double Action semiautomatic
Caliber(s)  9x19 Luger / Parabellum / NATO
Weight unloaded 900 g
Length 200 mm
Barrel length 115 mm
Magazine capacity 15 rounds

Sarsilmaz ST10 pistol  is manufactured in Turkey by Sarsilmaz company. This is a service-type pistol which is suitable for military, police and security use, as well as for self-defense. It is designed according to the U.S. Military standards, specification code MIL-P-48655. As with other Sarsilmaz pistols, such as Kilinc 2000, ST10 pistols are made from quality materials (forged steel and aluminum alloy; manufacturer states service life for this pistol for at least 25,000 rounds) and with fine workmanship.
Sarsilmaz ST10 pistols are short-recoil operated, locked breech semi-automatic pistols that use modified Browning-type action with tilting barrel. The barrel is locked to the slide by a single lug, which engages the ejection port. The slide rides outside of the frame by means of the external rails machined on the steel made and patented Slide Rail Part that is mounted on the lightweight aluminum alloy frame. Frame of the pistol is manufactured from lightweight aluminum alloy, slide is manufactured from forged steel. Trigger is of traditional double action type, with exposed hammer and automatic firing pin block safety. Manual safety lever is conveniently located on the frame, above the pistol grip, and locks the hammer and sear in lowered or cocked positions. Additionally it features automated firing pin (drop) and hammer safeties. Sarsilmaz ST10 pistols use double stack, single-feed high capacity magazines which hold 15 rounds, magazine release button is located at the base of the trigger guard. ST10 pistols are produced with fixed front and adjustable rear sights which are dovetailed to the slide. Front part of the frame is shaped to provide integral Picatinny rail for accessories such as laser aiming modules or tactical flashlights. Depending on the customer preferences, ST10 pistols can be produced with standard or polygonal rifling in barrels.

Sarsilmaz CM9



Sarsilmaz CM9 pistol (Turkey)
 


Type Double Action semiautomatic
Caliber(s) 9x19 Luger / Parabellum / NATO 
Weight unloaded 800 g
Length 187.5 mm
Barrel length 94.5 mm
Magazine capacity 15 rounds

Sarsilmaz CM9 pistol  is manufactured in Turkey by company Sarsilmaz. This is a service-type pistol which is most suitable for police and security use, as well as for self-defense. CM9 pistols are based on the Bernardelli / Sarsilmaz B6 pistols, and combine full-size grip (for large magazine capacity and comfortable hold) with shortened barrel and slide (for better concealment). As with other Sarsilmaz pistols, such as Kilinc 2000, CM9 pistols are made from quality materials (forged steel and polymers; manufacturer states service life for this pistol for at least 25,000 rounds) and with fine workmanship.
Sarsilmaz CM9 pistols are short-recoil operated, locked breech semi-automatic pistols that use modified Browning-type action with tilting barrel. The barrel is locked to the slide by a single lug, which engages the ejection port. Frame of the pistol is manufactured from durable, hight strength polymer, slide is manufactured from forged steel. Trigger is of traditional double action type, with exposed hammer and automatic firing pin block safety. Ambidextrous manual safety levers are conveniently located on the frame, above the pistol grip, and lock the hammer and sear in lowered or cocked positions. Sarsilmaz CM9 pistols use double stack, single-feed high capacity magazines which hold 15 rounds, magazine release button is located at the base of the trigger guard. CM9 pistols are produced with fixed or adjustable sights which are dovetailed to the slide. Front part of the frame is shaped to provide integral Picatinny rail for accessories such as laser aiming modules or tactical flashlights.

Sarsilmaz K2-45

Sarsilmaz K2-45 pistol (Turkey)
 
Type Double Action semiautomatic
Caliber(s)  .45 ACP
Weight unloaded 1140 g
Length 210 mm
Barrel length 116.5 mm
Magazine capacity 14 rounds

Sarsilmaz K2-45 pistol is manufactured in Turkey by company Sarsilmaz. These pistols are broadly based on the famous and well-proven design of the Czechoslovak CZ-75 pistol, and are made from quality materials (mostly forged steel; manufacturer states service life for this pistol for at least 25,000 rounds) and with fine workmanship.  Sarsilmaz K2-45 pistols are full-size, service-type pistols which are most suitable for police and security use, self-defense (although the pistol is somewhat big and heavy for concealed carry) and other uses such as practical shooting.
Sarsilmaz K2-45 pistols are short-recoil operated, locked breech semi-automatic pistols that use modified Browning-type action with tilting barrel. The barrel is locked to the slide by a single lug, which engages the ejection port. Frame and slide are manufactured from forged steel, and available in a variety of finishes. Trigger is of traditional double action type, with exposed hammer and automatic firing pin block safety. Manual safety lever is conveniently located on the frame, above the pistol grip, and locks the hammer and sear in lowered or cocked positions. Sarsilmaz K2-45 pistols use double stack, single-feed high capacity magazines which hold 14 rounds, magazine release button is located at the base of the trigger guard. K2-45 pistols are usually produced with fixed front and adjustable rear sights which are dovetailed to the slide. Front part of the frame is shaped to provide integral Picatinny rail for accessories such as laser aiming modules or tactical flashlights.

Sarsilmaz Kilinc 2000 / K10 / Armalite AR-24

Sarsilmaz K10 pistol
 
Sarsilmaz K10 pistol
 
Sarsilmaz Kilinc 2000 Light pistol
Sarsilmaz Kilinc 2000 Light pistol
 
Sarsilmaz Kilinc 2000 Mega pistol
Sarsilmaz Kilinc 2000 Mega pistol
 
Sarsilmaz Kilinc 2000 pistol, sold in the USA under brand Armalite model AR-24
Sarsilmaz Kilinc 2000 pistol, sold in the USA under brand Armalite model AR-24
 
Sarsilmaz K10C compact pistol
Sarsilmaz K10C compact pistol
 
 
  K10 K10C Kilinc 2000 Light Kilinc 2000 Mega
Type Double Action semiautomatic
Caliber 9x19 Luger / Parabellum / NATO
Weight unloaded 1190 g 950 g 990 g 990 g
Length 210 mm 190 mm 210 mm 205 mm
Barrel length 116.5 mm 96.5 mm 116.5 mm 114.5 mm
Magazine capacity 15 rounds 13 rounds 15 rounds 15 rounds

The Kilinc 2000 line of pistols is manufactured in Turkey by company Sarsilmaz. These pistols are based on the famous and well-proven design of the Czechoslovak CZ-75 pistol, and are made from quality materials (mostly forged steel; manufacturer states service life for this pistol for at least 25,000 rounds) and with fine workmanship. The line started as full-size K10 pistol, that later evolved into compact model K10C and several improved full-size Kilinc 2000 models with better ergonomics and aestetics. Sarsilmaz Kilinc 2000 pistols are officially adopted by Turkish Army (model Kilinc 2000 Light) and Turkish Police (model Kilinc 2000 Mega), and also widely exported throughout the world.Sarsilmaz Kilinc 2000 pistols are NATO-certified and have NATO stock numbers (NSN) assigned. In USA Sarsilmaz Kilinc 2000 handguns are sold under the Armalite trade name, as AR-24 model pistols, in both full-size and compact versions. 
Sarsilmaz Kilinc 2000 pistols are short-recoil operated, locked breech semi-automatic pistols that use modified Browning-type action with tilting barrel. Frame and slide are manufactured from forged steel, and available in a variety of finishes. Trigger is of traditional double action type, with exposed hammer and automatic firing pin block safety. Manual safety lever is conveniently located on the frame, above the pistol grip, and locks the hammer and sear in lowered or cocked positions. Kilinc 2000 pistols use double stack, single-feed magazines which hold 15 (full-size) or 13 (K10C compact model) rounds, magazine release button is located at the base of the trigger guard. Kilinc 2000 pistols are usually produced with fixed sights which are dovetailed to the slide.

Akdal Ghost TR-01

Akdal Ghost TR-01 pistol
 
Akdal Ghost TR-01 pistol
 
Akdal Ghost TR-01 pistol, partially disassembled
Akdal Ghost TR-01 pistol, partially disassembled


Type Single Action pre-cocked, semiautomatic
Caliber(s)  9x19
Weight unloaded 825 g
Length 190 mm
Barrel length 113 mm
Magazine capacity 15 rounds

Akdal Ghost TR-01 pistol is a new product from Turkish company Ucyildiz Arms Ltd Inc. It is a compact semi-automatic pistol which is obviously intended for police, security and civilian (where permitted by law) use. It appears to be heavily influenced by Austrian Glock pistols in its design, although Akdal Ghost pistol has improved ergonomics, especially in the grip area.
Akdal Ghost TR-01 pistol is short recoil operated, locked breech pistol. It uses modified Browning-type locking, in which barrel engages the slide with single lug, entering the ejection window. Unlocking and locking (lowering and rise of the barrel) is controlled by cam-shaped projection below the chamber, which interacts with steel insert, removably set into the polymer frame. The pistol is striker-fired and utilizes pre-cocked striker, which is put to full cock by the pull on the trigger. In case of the misfire, user has no 'second strike' capability and must cycle the slide to re-cock the striker to its pre-set state. Pistol also has no manual safeties; instead, it has automatic trigger and firing pin safeties. Magazines are double stack, holding 15 rounds of ammunition, with magazine release button located at the base of the trigger guard. Sights are fixed, and dovetailed into the slide. The polymer frame features removable backstraps (of different sizes), and an integral accessory Picatinny rail below the barrel.

Yavuz 16

Yavuz 16 Regard (full size) pistol
Yavuz 16 Regard (full size) pistol
 
Yavuz 16 Bora (compact) pistol with fully enclosed slide
Yavuz 16 Bora (compact) pistol with fully enclosed slide
 
Yavuz 16 Compact pistol
Yavuz 16 Compact pistol
 
 
  Yavuz 16 Regard Yavuz 16 Bora Yavuz 16 Compact
Type Double Action semiautomatic
Caliber(s)  9x19mm
Weight unloaded 850 g 895 g 800 g
Length 217 mm 197 mm 200 mm
Barrel length 125 mm 106 mm 110 mm
Magazine capacity 15 rounds 15 rounds 15 rounds

Yavuz 16 pistol is a relatively recent development of Turkish Yavuz company. Its basic variant, Yavuz 16 Regard, is closely patterned after famous Italian Beretta 92FS pistol, although it is also available in several visually different versions. According to available information, Yavuz 16 pistol has passed official Turkish military trials and is in use with certain elements of Turkish armed forces and police.
Yavuz 16 pistol is short recoil operated, locked breech pistol that uses Walther P38-type vertically tilting locking piece to lock the barrel and slide. Models such as regard and Compact use Beretta-type open-top slide, while models such as Bora and Zirve used enclosed-top slide with small ejection window on the right. Internally these pistols are basically similar to each other. Trigger of Yavuz pistol is of double action type, with exposed hammer and ambidextrous, slide-mounted safety/decocker levers. Magazines are double stack, magazine release button is located at the base of triggerguard.

Kanuni

Kanuni 16 pistol
 
Kanuni 16 pistol

Kanuni S pistol
Kanuni S pistol
 
 
  Kanuni 16 Kanuni S
Type Double action
Caliber 9x19 mm Luger / Parabellum
Weight unloaded 880 g 860 g
Length 192 mm 191 mm
Barrel length 112 mm 112 mm
Capacity 15 or 17 rounds

Kanuni series of pistols are manufactured in Turkey by the TISAS Trabzon Arms Industry Corp since 1998. These pistols are in use by Turkish military units, government airport security, and by some private security companies in Turkey. Unlike most other pistols of Turkish origin, these appear to be of more or less original design, and not being a copy of one existing European pistol or another. 
The Kanuni pistols are locked breech, short recoil operated weapons with modified Browning-type locking system, in which the barrel is locked to the slide using one large lug which engages the ejection port. The trigger unit is of double action type, with exposed hammer and slide-mounted safety. Additionally, these pistols feature an automatic firing pin block. The Kanuni S is a latest modification of the original Kanuni 16 pistol, and is a bit lighter thanks to shortened dustcover and slightly different frame shape. Both pistols use same double stack magazines which hold 15 (standard) or 17 (extended) rounds. Sights are fixed, with the rear sight being dovetailed to the slide.

Jumat, 25 Januari 2013

ZIGANA

ZIGANA M16 pistol
 
ZIGANA M16 pistol
 
ZIGANA T pistol
ZIGANA T pistol
 
ZIGANA K pistol
ZIGANA K pistol
 
 
 
 
  Zigana M16 Zigana T Zigana K
Type Double action
Caliber 9x19 mm Luger / Parabellum
Weight unloaded 940 g 980 g 940 g
Length 218 mm 220 mm 191 mm
Barrel length 126 mm 130 mm 103 mm
Capacity 15 or 17 rounds 15 or 17 rounds 15 or 17 rounds

Zigana series of pistols are manufactured in Turkey by the TISAS Trabzon Arms Industry Corp since 2001. These pistols are in limited use by several security companies in Turkey, as well as by some Turkish military units. Unlike most other pistols of Turkish origin, these appear to be of more or less original design, and not being a copy of one existing European pistol or another. 
The Zigana pistols are locked breech, short recoil operated weapons with modified Browning-type locking system, in which the barrel is locked to the slide using one large lug which engages the ejection port. The trigger unit is of double action type, with exposed hammer and slide-mounted safety. Additionally, these pistols feature an automatic firing pin block. The Zigana M16 was the original version of the pistol, with short underbarrel dustcover on the frame, and 126 mm (5") barrel. The Zigana T pistol features a heavier and slightly longer slide and improved frame with longer dustcover, barrel is also lengthened to 130 mm (about 5 1/8 "). Finally, the Zigana K is the compact version of the Zigana T pistol, with shortened slide and 103 mm (4") barrel. Double stack magazines with capacity of 15 rounds (standard) or 17 rounds (extended) are the same for all three versions. All Zigana pistols feature a three-dot fixed sights.

High Standard (Hi-Standard) HDM OSS silenced

High Standard Model B pistol with integral silencer, apparently an early trials model
High Standard Model B pistol with integral silencer, apparently an early trials model
 
High Standard Model H-D Military target / training pistol, which served as a base for productional / issue HDM / OSS silenced pistols
High Standard Model H-D Military target / training pistol, which served as a base for productional / issue HDM / OSS silenced pistols
 
High Standard Model HD (HDM) pistol with integral silencer, as used by OSS and later CIA agents
High Standard Model HD (HDM) pistol with integral silencer, as used by OSS and later CIA agents


Type Single Action semiautomatic
Caliber(s)  .22 LR (5.6mm rimfire)
Weight unloaded 1360 g
Length 350 mm
Barrel length 171 mm
Magazine capacity 10 rounds

During the World War 2 American government established an Office of Strategic Services (OSS), an intellegence and special operations agency. Among other things, the OSS sent undercover agents to occupied and enemy countries and supplied friendly resistance forces with equipment and weapons. Many clandestine operations, planned and performed by OSS, required silenced weapons, and a request has been sent to develop such a weapon. During 1943, a group of engineers at Bell Telephone Labs designed several silenced semiautomatic pistols, based on various small-bore target pistols made by Colt and High Standard. By late 1943, OSS choose the modified .22 caliber Hi-Standard HD pistol, fitted with integral silencer, and issued a contract for production of this weapon to High Standard Manufacturing corporation. During 1944, High Standard produced several thousands of these pistols, officially designated as "model HDM", but better known simply as "OSS pistols". After the war, Hi-Standard HDM pistols were used by CIA and military special operations personnel during Korean and Vietnam wars, as well as in a number of Cold War operations. It is also possible that few Hi-Standard HDM pistols survived long enough to be used during the Gulf War of 1991. However, probably the most famous user of the Hi-Standard HDM pistol was probably the Francis Gary Powers, an CIA pilot who was shot down in 1960 over the Soviet Union, when conduction spy flight on U2 airplane.
High Standard Model HD (HDM) pistol is a semi-automatic pistol with simple blowback action and single action trigger. It is based on High Standard model HD target / practice pistol. The barrel of the HDM gun is ported, and is enclosed within the long integral silencer. The rear part of the silencer, which is located around the barrel, is filled with roll of a fine brass mesh, and the fromt part of the silencer contains several baffles. According to the available information, this silencer provided noise reduction by some 22 dB. The silencer unit can be removed from the gun for cleaning and inspection of the barrel by unscrewing it. The silencer itself, however, is made as a disposable unit and cannot be disassembled. Service life of the silencer is estimated at 200 rounds, but it was Ok for a gun that was fired very seldom, and live-firing practice was conducted with standard, non-silenced High Standard pistols which have very similar handling characteristics.

FNP-45

FNP 45 pistol, left side
FNP 45 pistol, left side
 
FNP 45 pistol, right side
FNP 45 pistol, right side


Type Double Action semiautomatic
Caliber(s) .45ACP (11.43x25)
Weight unloaded 930 g / 32.4oz
Length 200 mm / 7.85"
Barrel length 114 mm / 4.5"
Magazine capacity 14 rounds (10 where required by law)

FNP 45 pistol is the next step in evolution of the FNP 9 / FNP 40 pistols line. First announced in 2007, the FNP 45 is just one of the many new, modern .45 caliber pistols which recently hit the civilian and law enforcement markets in USA. The increased interest in full-size, high capacity .45ACP pistols can be in part attributed to the several unsuccessful attempts of US armed forces to re-adopt this cartridge over the 9x19 NATO in the search of better stopping power. The same reason (combat effectiveness / stopping power) causes many police organizations and civilian shooters to re-think the role of the century-old .45ACP round. FNH USA, the US-based subsidiary of the famous Belgian arms-making company FN Herstal, took this cartridge and developed this serious service-type pistol. Based on its predecessors, FNP 45 is somewhat bigger and heavier than its 9mm/.40 caliber 'older brothers', and is best suited for holster carry. It features improved ergonomics, with fully ambidextrous controls and modular grip backstrap. Front of the frame is shaped to form Picatinny rail which can accept a wide variety of accessories like laser sights or tactical lights. The modular hammer units for FNP 45 are available in two versions - with manual safety that permits "cocked and locked" carry or with decock-only function (gun shall be carried with hammer lowered over the loaded chamber).
The FNP 45 is short recoil operated, locked breech pistol. The barrel is operated using a Browning cam system, and it locks to slide with single lug engaging large ejection port. Frame is made from high impact-resistant polymer. Double Action trigger system with exposed hammer has internal firing pin safety, with decocking or safety levers located at the both sides of the frame. Firing pin safety is standard, and the magazine safety is optional. The trigger / hammer module is formed as a single unit, easily detachable from the frame for inspection, maintenance or replacement. Optional hammer units can be found in DAO variety or in standard DA version but with manual safety / decock levers instead of the basic decock-only levers. Other easily replaceable units include the barrel cradle / slide rail module and the grip backstraps. Grip backstraps are available in two variations, with straight or curved shape. Standard sights are provided with white inserts and are dovetailed into the slide.

Boberg XR-9

Prototype Boberg XR-9 pistol, right side
Prototype Boberg XR-9 pistol, right side
 
Prototype Boberg XR-9 pistol, left side
Prototype Boberg XR-9 pistol, left side
 
Boberg XR-9 pistol, diagram; note how the feed claws are gripping the topmost cartridge in the magazine before pulling it back and up for loading into the barrel
Boberg XR-9 pistol, diagram; note how the feed claws are gripping the topmost cartridge in the magazine before pulling it back and up for loading into the barrel
 
Prototype Boberg XR-9 pistol, partially disassembled
Prototype Boberg XR-9 pistol, partially disassembled
 
Boberg XR-9 pistol (top) compared to Kahr PM9 pistol (bottom). Both guns are of very similar size and same caliber (9mm), but note the 29% difference in the barrel lenght, obvious by location of the ejection ports
Boberg XR-9 pistol (top) compared to Kahr PM9 pistol (bottom). Both guns are of very similar size and same caliber (9mm), but note the 29% difference in the barrel lenght, obvious by location of the ejection ports


Type Double Action Only semiautomatic
Caliber(s)  9x19 mm Luger / Parabellum
Weight unloaded 555 g / 19.5oz
Length 147 mm / 5.8"
Barrel length 107 mm / 4.2"
Magazine capacity 7 rounds

The XR-9 pistol is the product of the small US-based private enterprise Boberg Engineering, run by Arne Boberg. The concept of the XR-9 pistol is to provide ballistics (stopping power and penetration) of the full-size service-type pistol in sub-compact pistol, suitable for concealed carry. Tho achieve this goal, Boberg has used a century-old system of the two stage "pull-push" feeding, first encountered in the Gabbet-Fairfax "Mars" pistol built in England some 100 years ago. Similar system also is used in a number of belt-fed machine guns such as Maxim or Browning or Kalashnikov PK. In pistol, such system allows to extend the barrel further back into the slide and to place its breech area and chamber above the magazine, while in all conventional pistols the breech area of the barrel is located in front of the magazine. Development of this system, was commenced in 2004, with first prototypes being built to fire .32ACP / 7.65x17 ammunition. Those 1st generation prototypes featured gas delayed blowback action, which was later abandoned for reliability issues. Later on, Boberg switched to much more powerful (and certainly much more popular) 9x19 ammunition and rigid barrel locking, and currently (February 2008) his 3rd generation prototype pistols are offered in this caliber. Prototype XR-9 pistols were tested with wide range of ammunition against 'conventional' pistols of similar size. Thanks to significantly longer barrel, Boberg XR-9 provides about 25% increase in power (muzzle energy) compared to pocket pistols of the same size and caliber.
It must be noted that at the present time (Feb, 2008) Boberg XR-9 pistols exist only in prototype form.
Boberg XR-9 pistol is short recoil operated, locked breech pistol. It uses rotary barrel locking with single massive locking lug on the top of the barrel, which engages the slide when in battery. The trigger is of double action only (DAO) type, hammer-fired. The heart of the two-stage "pull - push" feed system is the claw-shaped loader, which is pivotally attached to the slide. When slide is in forward position, the claws are lowered under the barrel breech area, gripping the base of the topmost cartridge in the magazine. When slide is cycled (manually or under the recoil of the previous discharge), the claws pull the cartridge rearwards from the magazine until it is clear; at the end of  recoil stroke, claws are lifted to place the cartridge to feed position. On the closing stroke of teh slide, cartridhe is pushed into the barrel chamber, and the feed claws are lowered to grip on the following round in the magazine. Obviously, such system requires specially designed magazines and is somewhat more complicated than standard "push forward" feed system encountered in most other firearms, including pistols. The benefit of this system is significantly increased barrel lenght, which is especially important for compact pistols with shortest possible barrels.

 
Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | Online Project management