Tampilkan postingan dengan label Submachine Guns. Tampilkan semua postingan
Tampilkan postingan dengan label Submachine Guns. Tampilkan semua postingan

Sabtu, 02 Maret 2013

K-50M

 K-50M submachine gun.
 K-50M submachine gun.

Characteristics

Caliber 7.62x25 TT
Weight 4.4 kg empty
Length (stock closed/open) 571 / 756 mm
Barrel length 269 mm
Rate of fire 700 rounds per minute
Magazine capacity 35 rounds
Effective range 200 meters

Vietnamese K-50M submachine gun is a conversion of a Chinese-made Type 50 submachine gun (a license-built version of the Soviet Shpagin PPSh-41). During the sixties, China supplied many small arms to North Vietnam, including Type 50 submachine guns, many of which were later converted into more compact and maneuverable K-50M versions by local Vietnamese workshops.Conversion included shortening of the barrel jacket, installation of the new front sight, removal of the wooden stock and installation of the pistol grip and telescoped buttstock made of steel wire. All internal components remained the same as in Type 50 / PPSh-41.
K-50M submachine gun is a blowback-operated weapon that fires from open bolt, in single shots and full automatic. Fire mode selector is located in front of the trigger, safety is built into the bolt handle. Receiver of the weapon is stamped from steel. Gun uses PPSh-41-type 35-round curved box magazines, use of 71-round PPSh-41 drums is possible only if the telescoping butt is retracted. Open sights feature flip-up L-shaped rear blade,set up for 100 and 200 meters range.

53M / K1

53M / K1 submachine gun.
 53M / K1 submachine gun.
 
Characteristics

Caliber 7.62x25
Weight 3.1 kg empty
Length (stock closed/open) 542 / 827 mm
Barrel length 280 mm
Rate of fire ? rounds per minute
Magazine capacity 35 rounds

The 53M / K1 submachine gun was an indigenous weapon, designed during early 1950s by Hungarian designer Jozsef Kucher (hence the K1 index). It was officially adopted in 1953, and procured in limited numbers for police, border guard and certain paramilitary units in Hungary (the Hungarian armed forces adopted a license-built copy of Soviet PPSh-41 instead). The weapon appears to be of simple, robust and workmanlike design, and it s believed that it failed to achieve a more widespread success because of political, rather than technical matters.
The 53M / K1 submachine gun is a simple blowback weapon, firing from open bolt in semi-automatic or full automatic modes. The fire mode selector is located on the left side of the trigger housing, above the trigger. Safety is built into the bolt handle and locks the bolt in forward or rearward positions. Gun is mostly made from stampings; barrel is enclosed into perforated barrel jacket, and is equipped with muzzle brake - compensator. Metallic buttstock folds down and forward. The flip-up rear sight is L-shaped and has settings for 100 and 200 meters range.

Kiraly 39M 43M

39M submachine gun.
  39M submachine gun.
 
 43M submachine gun.
  43M submachine gun.
 
Kiraly's patent for his delayedblowback action used in 39M and 43M submachine guns.
 Kiraly's patent for his delayedblowback action used in 39M and 43M submachine guns.

Characteristics

  39M 43M
Caliber 9x25mm (9mm Mauser export)
Weight 4.15 kg 3.7kg
Length (stock closed/open) 1050 mm 745 / 950 mm
Barrel length 500 mm 425 mm
Rate offire 750 rounds per minute 650 rounds per minute
Magazine capacity 40 rounds 40 rounds
Effective range 300-400 meters 300 meters

The famous Hungarian arms designer Pal Kiraly developed his military-type 39M (39 Minta - model of [19]39) submachine gun at Hungarian Danuvia arms factory between 1937 and 1939. The 39M submachine gun bears more than passing resemblance to the Swiss-made SIG MKMS (M1934)submachine gun, which is not surprising, considering the fact that Kiraly worked in Switzerland at SIG factory during 1920s and 1930s, before returning to Hungary just prior to WW2. The 39M submachine gun represented a carbine-type weapon, being relatively large and heavy, so, in 1942-43 Kiraly also developed a more compact weapon along the same concept and delayed blowback action of his own design, known as 43M. Despite internal similarities and same caliber, the magazines of 39M and 43M were not interchangeable due to different feed angle on the 43M SMG. It must be noted that production of both submachine guns was somewhat limited, despite the fact that both were ranked among most powerful weapons in its class, thanks to long barrels and powerful 9x25 Mauser ammunition(muzzle velocity 450m/s, bullet weight 8.3 gram, muzzle energy 840 Joules)
The 39M submachine gun uses delayed blowback action designed by PalKiraly. In this system, bolt consists of two parts, with pivoting lever attached to the forward part (bolt head). When in battery, the bottom hand of the lever is resting against the receiver, and the upper rests against the rear part of the bolt (bolt body). Upon discharge, movement of the bolt head forces the lever to rotate back, thus speeding up the bolt body and slowing down the initial opening of the bolt head. Once the lever is fully pivoted, both parts of the bolt can recoil together freely against the return spring, to complete the firing and reloading cycle. Firing is from open bolt, in full automatic mode or single shots. Feed is from box magazines; magazine housing can be folded forward to save the space, with magazine resting inside the hollow stock,below the barrel. Stock is made of wood, the 43M submachine gun also having separate pistol grip and down-folding steel buttstock. sights are of open type,adjustable for range between 50 and 600 meters.

Sterling - Patchett L2A1 (Mk.1) - L2A3 (Mk.4), L34A1 (Mk.5)

 Sterling L2A3 / Mk.4 submachine gun, left side, butt folded.
 Sterling L2A3 / Mk.4 submachine gun, left side, butt folded.
Image: Frank Rodyns, Belgium
 
Sterling L2A3 / Mk.4 submachine gun, left side, butt retracted.
 Sterling L2A3 / Mk.4 submachine gun, left side, butt retracted.
Image: Frank Rodyns, Belgium
 
 Sterling L2A3 / Mk.4 submachine gun, right side.
 Sterling L2A3 / Mk.4 submachine gun, right side.
Image: Frank Rodyns, Belgium
 
Sterling L34A1 / Mk.5 silenced submachine gun.
 Sterling L34A1 / Mk.5 silenced submachine gun.
 
Sterling L2A3 / Mk.4 submachine gun, partially disassembled.
 Sterling L2A3 / Mk.4 submachine gun, partially disassembled.
Image: Frank Rodyns, Belgium

Characteristics

  Sterling L2A3 Sterling L34A1 silenced
Caliber 9x19mm Luger/Parabellum/NATO
Weight, empty 2,7 kg 3,6 kg
Length (stock closed/open) 481 / 686 mm 660 / 864 mm
Barrel length 196 mm 196 mm
Rate of fire 550 rounds per minute  550 rounds per minute
Magazine capacity 34 rounds 34 rounds
Effective range 200 meters 50-100 meters
 
The famous Sterling submachine gun was born in around 1942 as "Patchettmachine carbine" - a prototype submachine gun, developed by George W.Patchett and originally produced by Sterling Engineering Co in England. Several prototypes were built before the end of the war, and the Sterling-Patchett submachine gun participated in extensive trials, held in UK between 1945 and 1953, when it was finally announced as a winner of trials, and adopted as"9mm Sterling submachine gun L2A1" (factory designation was"Patchett Mk.1"). Sterling submachine guns were produced for British armed forces by Sterling company and Royal Ordnance Arsenalin Fazakerly, England; Long Branch Arsenal in Canada made a slightly modified Sterling under license for Canadian army as C1. In a slightly modified form,known in British service as L2A3 submachine gun or as "Sterling submachine gun, Mark 4" or Sterling Mk.4 in short, it served with British army until early 1990s, when it was finally replaced by troublesome L85A1 assault rifle. Nearly 400 000 of Sterling submachine guns were produced until late 1980s. In 1967, British army adopted the L34A1 /Sterling Mk.5 silenced submachine gun, which is apparently still in limited use with certain special operations elements in British army.
 Sterling submachine guns also were widely sold for export, more than 70 countries had purchased various quantities of Sterling submachine guns.
 It must be noted that Sterling submachine guns were rather popular among British troops, because of relatively compact size, adequate firepower and acuracy andgood reliability.
L2A3 /Sterling Mk.4 submachine gun is blowback operated, selective fired weapons that fires from open bolt. The fire mode selector / manual safety lever is located on the left side of trigger unit, above the grip panel. Tubular receiver, which also serves as a barrel jacket at the front, contains a cylindrical bolt with fixed firing pin. Bolt body has several spiral grooves on its outside surface which collect the dust and fouling from inside the receiver, and thus greatly improve reliability of the gun under field conditions. Feeding is from the left side;magazines are inserted horizontally, and ejection is to the right. Magazines are of slightly curved shape for improved feeding reliability. Buttstock is made from stamped steel and folds down and below the receiver to save space. Standard sights include protected front blade and flip-up rear aperture sight, marked for100 and 200 yards range, and also protected from sides by sturdy"ears".
 Special "high power, submachine-gun only" ammunition was procured by British army for Sterling submachine guns. This ammunition was absolutely safe in Sterling submachine guns, but can cause extensive wear to many 9mm pistols designed for commercial 9x19 ammunition.
 L34A1 /Sterling Mk.5 silenced submachine gun differed in the barrel section, as its barrel has some 72 small holes used to vent powder gases into the rear expansion chamber of the integral silencer. This was necessary to decrease the muzzle velocity of the bullet so it would be below the speed of sound. Like its predecessor, the STEN Mk.IIS, the silenced Sterling gun was intended to be fired mostly in semi-automatic mode; the full-automatic fire was for emergency purposes only.

MCEM-2 experimental

MCEM-2 experimental submachine gun, with shoulder stock / holster attached.
 MCEM-2 experimental submachine gun, with shoulder stock / holster attached.

Characteristics

Caliber 9x19mm Luger / Parabellum
Weight 2,7 kg empty
Length (stock closed/open) n/a
Barrel length n/a
Rate of fire ~ 1000 rounds per minute
Magazine capacity 18 rounds
Effective range ~50-100 meters

MCEM-2 (Machine Carbine Experimental Model 2) submachine gun was produced only in prototype form, but it is worth to mention by the simple fact that it is one of the very first submachine guns to combine wrap-around bolt and magazine in pistol grip - features, later copied in Czechoslovak SA23, Israeli Uzi and a great number of other submachine guns. MCEM-2 was the second prototype in a line of experimental submachine guns, designed in Britain in 1944. It was envisioned as a possible replacement for the STEN submachine gun then inservice. The MCEM-2 was developed by polish immigrant, someone called Podsenkowski. It is believed that prototypes of MCEM-2 were made before the endof WW2, and its derivatives MCEM-4 and MCEM-6 were tested soon after the war.The latter modifications differed mostly in adoption of the rate-reducing mechanism, incorporated into trigger unit; the rate of fire therefore was decreased from 1000 to more realistic 700 rounds per minute. Nevertheless,neither prototype was found suitable for adoption, and several years later British army adopted a more conventional submachine gun, the Sterling-Patchett.
MCEM-2is blowback-operated, selective fired weapon which fires from open bolt. Thebolt is of "telescoped", or "wrap-around" type, with most of its mass being in front of the breech face. The receiver is made from steel tube, and pistol grip with trigger unit is attached below. magazine is inserted into the pistol grip. safety and fire mode selector are incorporated into one three-position switch, located in front of the trigger on the left side of the trigger unit housing. The guns was developed along with large semi-rigid holster, which can be attached to the receiver of the gun to form the shoulder stock.

Lanchester Mk.1

Left side view on Lanchester Mk.1 submachine gun, with 50-round magazine inplace.
 Left side view on Lanchester Mk.1 submachine gun, with 50-round magazine inplace.
 
 Right side view on Lanchester Mk.1* submachine gun, without fire mode selectorand with simplified rear sight. Bayonet lugs are clearly visible near the muzzle.
 Right side view on Lanchester Mk.1* submachine gun, without fire mode selectorand with simplified rear sight. Bayonet lugs are clearly visible near the muzzle.

Characteristics

Caliber 9x19mm Luger / Parabellum
Weight 4,3 kg empty
Length 751 mm
Barrel length 200 mm
Rate of fire 600 rounds per minute
Magazine capacity 50 rounds
Effective range 150-200 meters

The Lanchester Mk.1 submachine gun, or Lanchester Mk.1 machine carbine incontemporary British nomenclature, was a very close copy of German SchmeisserMP-28 submachine gun. It was developed by George H. Lanchester andmanufactured by Sterling Engineering Co between 1941 and 1945. This weapon wasmade in two versions, Mk.1 and Mk.1* (Mark 1, star). The latter was a simplifiedversion of the original Mark 1, with omitted fire mode selector, and thus firing in full automatic mode only. Most Lanchester submachine guns went for BritishNavy.
The Lanchester Mk.1 submachine gun  is blowback operated, selective-fire weapon that firedfrom open bolt. Tubular receiver was attached to the front of the wooden stock,and could be pivoted barrel down for maintenance and disassembly. Magazines areinserted from the left side, ejection is to the right. Magazine housing was made from brass. Manual safety is made in the form of locking cut, made in the receiver, which engages the bolt handle to lock bolt in open (cocked) position. Fire mode selector was located in front of the trigger, and was not present on Mk.1* weapons. Standard sights consisted of blade front and tangent rear sight, marked from 100 and up to 600 yards (approx 550meters). Some Mk.1* guns had simplified, flip-up rear sights marked for 100 and200 yards. The wooden stock was patterned after that of Lee-Enfield rifle, and gun accepted 1907-pattern knife-bayonet, originally developed for the above mentioned rifle.

STEN submachine guns

STEN Mk.I (STEN Mark 1) submachine gun, with magazine removed.
STEN Mk.I (STEN Mark 1) submachine gun, with magazine removed.
 
STEN Mk.II (STEN Mark 2) submachine gun.
STEN Mk.II (STEN Mark 2) submachine gun.
 
STEN Mk.IIS (STEN Mark 2 Silenced) submachine gun.
STEN Mk.IIS (STEN Mark 2 Silenced) submachine gun.
 
STEN Mk.III (STEN Mark 3) submachine gun.
STEN Mk.III (STEN Mark 3) submachine gun.
 
STEN Mk.IV (STEN Mark 4) submachine gun.
STEN Mk.IV (STEN Mark 4) submachine gun.
 
STEN Mk.V (STEN Mark 5) submachine gun.
STEN Mk.V (STEN Mark 5) submachine gun.
 
STEN Mk.VI (STEN Mark 6 silenced) submachine gun.
STEN Mk.VI (STEN Mark 6 silenced) submachine gun.

Characteristics

  STEN Mk.II STEN Mk.IIS STEN Mk.III STEN Mk.V
Caliber 9x19mm 9x19mm 9x19mm 9x19mm
Weight, empty  3,26 kg  3,48 kg  3,18 kg 3,86 kg
Length 895 mm 900 mm 762 mm 762 mm
Barrel length 196 mm 90 mm 196 mm 196 mm
Rate of fire 550 rounds per minute 450 rounds per minute 550 rounds per minute 600 rounds per minute
Magazine capacity 32 rounds 32 rounds 32 rounds 32 rounds
Effective range 150-200 meters 50-100 meters 150-200 meters  150-200 meters

The STEN name came out of names of the designers (R. V. Shepard and H. J. Turpin) and from the factory where they worked (Enfield arsenal). It was one of the most crude and ugly and simply, but effective submachine guns of the WW2. Almost 4 millions of STEN guns of different versions were made between 1941 and 1945. STEN guns were made not only in Royal Small Arms factory in Enfield; other makers included famous British gunmaking company of the time BSA Ltd, as well as Royal Ordnance Arsenal in Fazakerly, England, and Long Branch Arsenal in Canada.
The first STEN, STEN Mk.I (full official name was 9mm STEN Machine Carbine, Mark 1), was developed in mid-1941. It was blowback operated, automatic weapon that fired from the open bolt. Trigger unit permitted for sigle shots and full automatic fire, controlled by the cross-bolt type button, located in front and above trigger. The tubular receiver and the barrel shroud were made from rolled steel. The gun was fed from left side mounted box magazines. The stock was of skeleton type, made from steel. Sights were fixed, pre-adjusted for 100 yards distance, peep hole rear and blade front. The Mk.1 featured spoon-like muzzle compensator. Some guns featured small folding forward grip. Total production of Mark 1 and slightly modified Mark 1* STEN machine guns was about 100 000.
The STEN Mk.II submachine gun was most widely made gun in entire STEN series, with about 2 millions of Mark 2 being made during the war. It was slightly smaller and lighter than Mk.I. Basic design was the same as Mark 1, with omission of all wooden parts of Mk.I and shorter barrel jacket, which made the Mk.II lighter than its predecessor. Magazine housing could be rotated for about 90 degrees down to close feed and ejection apertures during transportation and off-battle carry (this feature caused much troubles as the rotary unit was not very durable and magazine could be misaligned during combat, what led to feed malfunctions and jams). Another source of problems was magazine spring, so magazines were routinely loaded with 28-30 rounds instead of "full capacity" 32 rounds to reduce strain on the magazine spring.
Some Mk.II STEN guns were manufactured with integral silencers for undercover operations and were marked as Mk.II(S). These guns had shortened barrels enclosed into integral silencer. The silencer was rather effective so most audible sound when firing Mk.IIS was the clattering of the bolt moving back and forth in the receiver. Contemporary manuals advised that Mk.IIS submachine gun was to be fired in semi-automatic mode; the ful-automatic fire was reserved for emergency situations, as it decreased the service life of  silencer significantly.
The STEN Mk.III was modification of Mk.I. The major change was that the receiver and the barrel shroud were made from single tube (wrapped from sheet-steel and welded at the top) that extended almost to the muzzle. Another changes included fixed magazine housing for improved reliability and small finger guard in the front of the ejection port. Internally, Mk.III was similar to Mk.I and has same variety of skeleton stocks. Mk.III first appeared in 1943.
The STEN Mk.IV was made in experimental form only, and did not entered the production. It was originally intended for airborne troops.
The STEN Mk.V submachine gun was an attempt to made Mk.II a more "good looking'" gun. Being internally the same as Mk.II, the "STEN Mk.V machine carbine" featured wooden buttstock and rear pistol grip, new front sight and bayonet mount. Early Mk.V's also featured wooden front grips, but these were prone to breakage and thus were removed soon. STEN Mk.V appeared in 1944 and remained in service until the early 1960s', and then replaced by Sterling submachine guns.

Taurus MT-9 G2 and MT-40 G2

Taurus MT 9 G2
Taurus MT G2 submachine gun
 
Taurus MT 9 G2
Taurus MT G2 submachine gun with shoulder stock folded
 
 
 
MT9 G2
MT40 G2
Caliber, mm
9x19 mm
.40 SW
Length, overall, mm
466 / 753
466 / 753
Weight, kg
3,29
3,29
Barrel length, mm
200
200
Magazine capacity, rounds
34
15 and 30
Rate of fire, rounds per minute
700-800
700-800
 
The Taurus MT G2 line of submachine guns first appeared in early 2011, apparently to replace older Taurus MT submachine guns in same calibers. These weapons represent 2nd generation of Taurus submachine guns, hence the apparent G2 addition to the name. Compared to 1st generation weapons, new Taurus MT G2 submachine guns offer more noticeably lower and controllable rate of fire, better ergonomics and probably more economical production, thanks to use of more modern manufacturing techniques. It is yet to be seen if these weapons will be adopted by any major force, though. Taurus also offers a semi-automatic version of the G2 line, known as CT G2, which is intended primarily to civilian and security markets.
 
The Taurus MT9 G2 and MT40 G2 sub-machine guns differ only in caliber. Both weapons are built using simple blowback action and firing from closed bolt for enhanced accuracy. Upper receiver is an extruded aluminum unit, while lower receiver is made from polymer with steel reinforcements where necessary. Weapon is fitted with ambidextrous safety / fire mode selectors which allow for semi-automatic fire, 2-round burst mode and full-automatic fire. Bolt catch is provided to hold the bolt open once the magazine is empty. Feed is from proprietary double stack box magazines, holding 34 rounds of 9mm ammunition of 30 or 15 rounds of .40SW ammunition. Furniture includes AR-15 type pistol grip and side-folding buttstock, made of plastic and adjustable for length of pull. Top of upper receiver is provided with integral Picatinny rail, and the MT G2 submachine guns are normally fitted with iron sights; rear sight has two range settings, for 25 and 50 meters. Additional mounting points for more Picatinny rails are provided on the sides and on the bottom of the polymer forend.

Taurus MT-9 and MT-40

Taurus MT-9
Taurus MT-9 submachine gun
 
 
MT-9
MT-40
Caliber, mm
9x19 mm
.40 SW
Length, overall, mm
421 / 677
421 / 677
Weight, kg
3.06
3.0
Barrel length, mm
200
200
Magazine capacity, rounds
30
30
Rate of fire, rounds per minute
1300
1200
 
During the 1990s Taurus replaced in production its MT-12A submachine gun (licensed copy of the Beretta PM-12) with another foreign design, this time purchased from Chile. Originally known as the FAMAE SAF, in Brazil it is made in a slightly modified form as the Taurus MT-9 (in 9mm Luger) and MT-40 (in .40SW, especially for the Brazilian police forces that favour this caliber). In this case, the MT index stands for Metralhadora Taurus – Taurus Submachine gun, and the digits denote a caliber. Taurus also makes an interesting offshoot of the MT-40, the CT-40 semi-automatic carbine, which is also intended for police and security use but is restricted to semi-automatic fire and has somewhat longer barrel.
 
The Taurus MT-9 and MT-40 sub-machine guns differ only in caliber. The MT-9 is based on the receiver and trigger group of the 5.56mm SG-540 assault rifle, made in Chile by FAMAE under license from the Swiss SIG company. The basic rifle receiver is shortened in the magazine area to accommodate the more compact pistol caliber rounds, and the gas operated action is replaced by a simple unlocked bolt (blowback action). The rifle trigger group with an internal hammer and three modes of fire (single shots, 3-round bursts or full-automatic) is retained, and the gun is fired from a closed bolt. A bolt hold-open device is provided, with a bolt release button located on the left side of the receiver, above the magazine catch. Fire mode selector levers are located on both sides of the receiver and also work as manual safeties. The receiver itself is made from two halves, upper and lower, both manufactured from stamped steel and connected at the front by a hinge. the pistol grip and forend are made from polymer. The gun is equipped with a side-folding skeletonized butstock. Standard sights include a protected front post and a combination drum-type rear, which has a V-type notch for 50 meters range and apertures for 100 and 150 meters.

Mekanika URU

Mekanika URU submachine gun.
Mekanika URU submachine gun.

Characteristics

Caliber 9x19mm Luger / Parabellum
Weight 3.9 kg empty
Length (stock closed/open) 456 / 689 mm
Barrel length 175 mm
Rate of fire 750 rounds per minute
Magazine capacity 30 rounds

The URU submachine gun was designed in Brazil by Olympio Vieira de Mello in 1974-75. The production of the new submachine gun was commenced at the company Mekanika Indústria e Comércio Ltda, Rio de Janeiro, in 1977. Total production of the URU submachine guns for Brazilian military and police between 1977 and 1985 is estimated at about 10 thousands guns. 
The Mekanika URU submachine gun is a simple blowback weapon which fires from open bolt. It is capable of semi- and full-automatic fire, and combination safety / fire mode selector lever is located on the left side of the trigger unit. The receiver and barrel jacket are made from steel tube, the trigger housing and magazine well / forward grip are made from steel stampings. Gun is equipped with side-folding metallic buttstock. Sights are fixed, comprising of rear aperture and front post, factory zeroed for 50 meters range.

Sabtu, 26 Januari 2013

Shipka

 
Shipka SMG in 9x18 Makarov.

Characteristics

Caliber: 9x18mm Makarov; 9x19mm Luger/Para
Weight: 2.0 - 2.2 kg withouth magazine
Lenght (stock closed/open): 338 / 625 mm
Barrel lenght: 150 mm
Rate of fire: 700 rounds per minute
Magazine capacity: 32 rounds (25 rounds for 9x19mm)
Effective range: 150 meters

The "Shipka" SMG was developed by Bulgarian company ARSENAL for police and military use, and currently is offered for export. It appeared on the market circa 1996. According to some sources, it is used by Bulgarian police and security forces.
"Shipka" (named after historical place in Bulgaria) is a straightforward design, using simple blowback operation and firing from open bolt. The lower receiver along with pistol grip and triggerguard is made from polymer, the upper receiver is made from steel. Simple buttstock is made from steel wire and folds to the left side of gun.

FN P90 personal defense weapon

FN P90 personal defense weapon / submachine gun in basic configuration, left side.
FN P90 personal defense weapon / submachine gun in basic configuration, left side.
 
FN P90 personal defense weapon / submachine gun in basic configuration, right side.
FN P90 personal defense weapon / submachine gun in basic configuration, right side.
 
FN P90 TR (triple rail version) personal defense weapon / submachine gun, with installed accessories including optical sight on top rail, flashlight on left rail, and silencer on the barrel.
FN P90 TR (triple rail version) personal defense weapon / submachine gun, with installed accessories including optical sight on top rail, flashlight on left rail, and silencer on the barrel.
 
FN PS90 - a civilian semi-automatic only version of P90 with long barrel.
FN PS90 - a civilian semi-automatic only version of P90 with long barrel.
 
Bottom view on the filed FN P90 magazine, showing position of the stored cartridges and cartridge in feed position.
Bottom view on the filed FN P90 magazine, showing position of the stored cartridges and cartridge in feed position.
 
FN P90 partially disassembled.
FN P90 partially disassembled.

Characteristics

Caliber: 5.7x28mm SS190
Weight: 2.54 kg empty; 3 kg loaded with magazine with 50 rounds
Length: 500 mm
Barrel length: 263 mm
Rate of fire: 900 rounds per minute
Magazine capacity: 50 rounds
Effective range: 200 meters

The FN P90 submachine gun (SMG) was developed in the late 1980s as a personal defense weapon for the troops whose primary activities does not include small arms, such as vehicle and tank crew members, artillery crews etc. Standard pistols and submachine guns chambered for pistol rounds were proved ineffective against enemy soldiers, wearing body armor; Therefore FN designers first developed a new round with enhanced penetration, initially known as SS90. To achieve necessary high penetration while keeping recoil impulse low, FN used a small-bore approach, creating a round that looked much like the scaled down 5,56NATO round. It must be noted that similar concepts were tried in other countries, most notably in USA, several decades before FN; for example, US Army tested M1 carbines chambered for .221 Johnson Spitfire round back in late 1950s; later on, Colt produced its .22 SCAMP and 5,6x30 MARS ammunition for special SCAMP machine pistol and MARS "mini assault rifle" (a scaled-down M16 rifle) respectively. It must be noted that 5,6x30 MARS round was in a sense a direct predecessor to 5,7x28 FN SS90 round, although the latter featured slightly lighter and faster bullet. By late 1980s a concept of a small-bore, low-impulse "personal defense weapon" (PDW) with good accuracy and lethality at ranges of up to 200-250 meters was well established, although there were no weapons adopted for service yet. FN decided to follow this concept and to create its own PDW using clean sheet approach. Basic ideas used for this development, designated as "Project 9.0", included the following: minimal size and weight of weapon; large magazine capacity; complete ambidexterity; ease of use and maintenance.
To save on size and weight, FN designers put new weapon into compact and lightweight stock of bullpup layout, made of impact-resistant polymer. The high-capacity magazine also was made from semi-translucent polymer, and holds 50 rounds in two rows. To made loaded weapon as compact as possible, FN designers followed the idea of American designer Hall, and placed the magazine above the barrels, with cartridges stored in horizontal position with bullets pointing to the left. While Hall system employed a rotary feed unit, operated by the bolt, to put new cartridge in line with the barrel, FN designers incorporated a stationary helical ramp into each magazine, which rotates cartridge for 90 degrees prior to placing it into feed lips. Complete ambidexterity was achieved by using ambidextrous controls (including dual charging handles and dual back-up open sights), and bottom ejection. Finally, simplicity of aiming was achieved by use of integral reflex type collimating sight and integral laser aiming module (LAM).
Resulting weapon appeared in around 1990 as FN P90 personal defense weapon, along with improved 5,7x28 SS190 ammunition, which replaced polymer-cored bullets with heavier dual-core (steel / aluminum) bullets with better penetration against body armor. Several other types of ammunition were developed for this weapon, including tracer, subsonic ball and soft-core training ball.
First sales of P90 were made to Saudi Arabia in early 1990s; today it is believed that FN sold more than 20 000 of P90's to a wide variety of law enforcement agencies and military special operation units worldwide, including US Secret Service, Austrian Army rangers, Dutch BBE special operations forces, Belgian Army and others. Most interesting fact about adoption of P90 is that so far it has been adopted for the role, directly opposite to its original niche of "personal defense weapon". In fact, most services and agencies that adopted P90 use it for offensive roles, as a specialist or even a primary weapon for various assault teams, and other "professional small-arms users", as opposed to military personnel which primary functions do not include use of small arms.
In around 1995 FN supplemented the P90 with pistol, firing the same 5,7x28 ammunition, designated as FN Five-seveN. Recently, FN also introduced a civilian version of P90, designated as PS90 carbine. This is a self-loading weapon with longer barrel (408 mm / 16").
FN P90 personal defense weapon is blowback operated, selective-fired weapon which fires from closed bolt. The firing is controlled by a removable trigger unit with conventional hammer. A manual safety is located directly below the trigger. Magazine lies at the top of the weapon, feeding from front-to-back, with spiral ramp built into the "rear" part of the magazine. Spent cartridges are ejected straight down through the chute, which exits just behind the pistol grip. The standard sighting equipment includes a non-magnifying collimating sight with "ring and dot" illuminated aiming reticule. Back-up open sights are provided at either side of the primary collimating sight. The so-called P90 USG version is provided with two additional Picatinny rails at either side of the collimating sight base; FN also offers a version with no standard sighting equipment; user has to make its own choice of day and/or night sights and additional equipment, which can be installed on three Picatinny rails - top, left and right. This version is designated as P90 TR (triple rail). The front part of the forward handgrip on P90 is shaped as hand protector, and it can contain integral laser aiming module, which sends either visible or IR laser beam to mark the intended target. For special missions P90 can be fitted with a special silencer, which is used in conjunction with special subsonic ammunition.

Vigneron M2

Vigneron M2 submachine gun, right side.
Vigneron M2 submachine gun, right side.
 
Vigneron M2 submachine gun, left side.
Vigneron M2 submachine gun, left side.

Characteristics

Caliber 9x19mm Luger / Parabellum
Weight 3,28 kg empty
Length (stock closed/open) 695 / 872 mm
Barrel length 300 mm
Rate of fire 620 rounds per minute
Magazine capacity 32 rounds
Effective range 100 meters

The Vigneron submachine gun was developed during early fifties by the officer of the Belgian army and produced by Belgian company Precision Liegoise SA. It was adopted by Belgian army in 1953, and saw some combat in then-Belgian Congo. Vigneron submachine gun was quite conventional in design and appearance, and not much more can be told about this weapon.
Vigneron submachine gun is blowback operated, selective fired weapon which fires from open bolt. Fire mode selector / safety switch is located on the left side of the grip, just behind the trigger. It is interesting that in full automatic mode short pull on the trigger will still, produce single shots, and only a long pull will produce full automatic fire. Additional automated safety is built into the backstrap of the pistol grip. Cocking handle is located on the left side of the receiver, and is stationary when gun is fired. Ejection port has a spring-loaded dust cover. Barrel is relatively long and has two ports just behind the front sight base, which serve as a muzzle rise compensator. Sights are fixed, with rear aperture set for 50 meters range. Stock is made from steel wire and is retractable, with several positions so shooter can adjust it to his own preferences.

K6-92 / Borz

K6-92 / Borz submachine gun.
K6-92 / Borz submachine gun.

Characteristics

Caliber 9x18 Makarov PM
Weight 1.96 kg
Length (stock closed/open) 370 / 700 mm
Barrel length 150 mm
Rate of fire ? rounds per minute
Magazine capacity 17, 25 or 30 rounds

The K6-92 submachine gun was developed during early 1990s in the republic of Armenia, which gained its independence in 1991 after the fall of the Soviet Union. At the time Armenia was engaged in the local conflict with Azerbaijan (another ex-USSR republic), and was in desperate need for small arms. The submachine gun is one of the simplest automatic arms to design and manufacture, so Armenian engineers quickly developed a straightforward weapon, which can be easily manufactured by almost any mechanical workshop.
Later on, more than few K6-92 submachine guns made its way through the borders into the Chechen republic, the most turbulent part of the Russia. During mid-1990s Chechnya was heavily infested with separatists, Islamic extremists and other kinds of bandits, which found submachine guns to be convenient weapons for urban fighting. Separatist Chechen government attempted to produce a "local" copy of the K6-92 at one of machine-building factories in the city of Groznyj, but very few were made there due to production problems and quality issues. Chechen-made copies of the K6-92 submachine gun are usually referred to as "Borz" (which means "wolf" in Chechen language). It also must be noted, however, that underground workshops, run by separatist forces, also made some "generic" crudely made submachine guns, generally known under the same name (Borz). These "homemade" submachine guns can be distinguished by tubular receiver and extremely poor fit and finish. Overall, the K6-92 submachine guns are reported as crude arms, suitable mostly for close combat. Over last two decades, plenty of these submachine guns turned up in Russia and other former USSR states during various crimes of violence and illegal arms trafficking.
The K6-92 submachine gun is a simple blowback operated weapon  that fires from open bolt. Receiver is made from steel stampings, welded together. Cocking handle is located at the top, safety / fire mode selector is located at the left side of the gun, above the trigger guard. Gun can be fired in single shots or in full automatic. It is fitted with plastic pistol grip and a top-folding metallic buttstock.

Steyr AUG Para 9mm

Steyr AUG A1 Para 9mm submachine gun, original version.
Steyr AUG A1 Para 9mm submachine gun, original version.
 
Steyr AUG A3 XS 9mm submachine gun.
Steyr AUG A3 XS 9mm submachine gun.

Characteristics

Data for current production Steyr AUG A3 XS submachine gun
Caliber
 9x19mm Luger/Parabellum
Weight 3,0 kg empty
Length 610 mm
Barrel length: 325 mm
Magazine capacity 25 rounds
Rate of fire ~700 rounds/minute

The original Steyr AUG Para 9mm submachine gun is a reversible conversion of the original Steyr AUG assault rifle, intended mostly for short-range police and special operations work. This weapons combines relatively compact dimensions with very good accuracy (compared with other 9mm submachine guns), thanks to a long barrel and closed-bolt firing. If necessary, Steyr AUG 9mm submachine gun also can be fitted with silencer.
Steyr AUG Para 9mm submachine gun utilizes basic components (aluminum receiver and polymer stock of bullpup configuration) from the Steyr AUG assault rifle. The 9mm barrel is installed (original Steyr AUG assault rifles have quick detachable barrels), and a gas-operated locked bolt action is replaced with simple blowback (unlocked) bolt. Original firing system with hammer and pull-through selective trigger (short pull results in single shots, long pull - in full automatic fire) is retained, and a special magazine adapter is installed into the magazine housing. Depending on the basic version of the Steyr AUG assault rifle, which is used for conversion, 9mm version will retain its parent sighting equipment - 1.5X telescope sight in A1 version of Picatinny rail with optional open or optical sights in A2 and A3 versions.

Steyr TMP

Steyr TMP.
Steyr TMP. 
 
Characteristics

Caliber: 9x19mm Luger/Parabellum
Weight: 1,3 kg empty
Length: 282 mm
Rate of fire: 800-900 rounds per minute
Magazine capacity: 15 or 30 rounds

Steyr TMP is a modern compact SMG. It is blowback operated, locked breech design, with rotating barrel. This mean that after the shot bolt with barrel locked to it are moving backward for some 4 millimeters. Then, the barrel rotates clockwise slightly, and thus unlocks the bolt. Rotaton controls via small cam on the barrel that follows the spiral groove inside the receiver.
Both upper and lower receiver are made from polymer. TMP has no stock and could be fired only from off-hand position.
Safeties featured automatic off-battery safety, drop safety and the manual safety switch.
TMP is reported as a very controllable and comfortable to fire firearm.

Steyr MPi 69 and MPi 81

Steyr MPi 69 submachine gun.
Steyr MPi 69 submachine gun.
 
Steyr MPi 81 submachine gun; note added cocking handle that replaced sliding front sling swivel of MPi 69.
Steyr MPi 81 submachine gun; note added cocking handle that replaced sliding front sling swivel of MPi 69.
 
Characteristics

Caliber: 9x19mm Luger/Para
Weight: 3.13 kg empty
Length (stock closed/open): 465 / 670 mm
Barrel length: 260 mm
Rate of fire: 550 rounds per minute
Magazine capacity: 25 or 32 rounds
Effective range: 100-150 meters

The Steyr MPi 69 submachine gun was developed by Austrian company Steyr-Daimler-Puch during early sixties and put into production; in around 1981 the basic design was slightly improved with addition of a conventional bolt cocking handle. The updated version was designated as MPi 81 and was manufactured until about mid-1990s. Both versions are in use by several police and military forces in Europe and elsewhere.
Steyr MPi 69 submachine gun is a blowback operated, selective fire weapon that fires from open bolt. The receiver is made from stamped steel, the receiver cover and pistol grip are made from nylon. The bolt is of "wrap-around" type (most of its weight is located in front of the breech face, around the barrel) and had a fixed firing pin. The cocking handle on MPi 69 is combined with front sling swivel; to cock the bolt, shooter has to pull the front part of the sling rearward and then release it. On MPi 81 submachine gun, this system is replace by conventional bolt cocking handle. Both MPi 69 and MPi 81 had cross-bolt button manual safety, located above the trigger. The fire mode selection mechanism is a combination of the trigger pull and safety button. If the safety button is pushed all the way to the left, the short pull on the trigger will produce single shots, and the long pull will produce burst firing. If the safety button will be left in mid-way position, only single shots will be possible. If the safety is all the way to the right, the gun is set to safe and will not fire.
Sights consist of protected front and flip-up type rear. The shoulder stock is retractable and made from steel wire.

Steyr - Solothurn S1-100 / MP-34

Steyr MP-34 submachine gun, left side.
Steyr MP-34 submachine gun, left side.
 
Steyr MP-34 submachine gun, right side.
Steyr MP-34 submachine gun, right side.
 
Steyr MP-34 partially disassembled.
Steyr MP-34 partially disassembled.
 
Drawing from original patent, covering S1-100 integral magazine loading device.
Drawing from original patent, covering S1-100 integral magazine loading device.
 
Characteristics
 
Caliber 9x19mm Luger / Parabellum, 9x23 Steyr, 9x25 Mauser Export
Weight 4,25 kg empty
Length 850 mm
Barrel length 200 mm
Rate of fire 400-500 rounds per minute
Magazine capacity 32 rounds
Effective range 150-200 meters

The story of this weapon start in around 1919, when German arms-making company Rheinmetall produced a prototype submachine gun designated MP.19. This weapon was developed by Lous Stange to same specifications as Schmeisser'sMP.18/I, but MP.19 came too late to see any action during WW1. After the end of WW1, Germany was severely limited in design and production of small arms by treaty of Versailles. When Hitler came into power, German military-oriented companies began to move the R&D outside of Germany to avoid treaty limitations. In 1929, Rheinmetall purchased the small Swiss-based company Wafenfabrik Solothurn, which was used to finalize some Rheinmetall small arms which were developed under secrecy in Germany. One of those weapons was an improved version of MP.19 submachine gun, which was announced by Waffenfabrik Solothurn under company index "S1-100". This was an excellent weapon, reliable, controllable and accurate, but Solothurn company lacked production capabilities. To make guns on industrial scale, Solothurn teamed with famous Austrian gun-making company Waffenfabrik Steyr, and formed trade company Steyr-Solothurn Waffen AG in Zurich, Switzerland. This company sold weapons designed by Rheinmetall and Solothurn and made by Steyr, and S1-100 submachine gun was among first products of this international conglomerated. In the 1930 Austrian police adopts the S1-100 as Steyr MP.30, chambered for standard Austrian 9x23 Steyr pistol cartridge. It was also exported to Chile, Bolivia, Uruguay and El Salvador; it also was sold in limited numbers to China, in 7,63x25 Mauser caliber. Portugal adopted the S1-100 in 7,65x22 Luger caliber in 1938, and in 1942 purchased more S1-100's from Steyr but this time in 9x19 Luger. For South American markets, Steyr produced version of S1-100 in .45ACP caliber; this version was distinguished by additional pistol grip under the forearm. Austrian army adopted the S1-100 as Steyr MP.34, chambered for powerful 9x25 Mauser ammunition. When Hitler's Germany occupied Austria in 1938, it quickly consumed most of Austrian MP.30's and MP.34's, and after rebarreling to 9x19 ammunition these weapons were issued to German troops as MP.34(ö). Production of Steyr-Solothurn submachine guns has ceased in around 1940, when, under German administration, it was replaced in production at Steyr by much simpler and less expensive MP-40 submachine gun of German design. It must be noted that S1-100 was one of the finest submachine guns made prior to WW2, and probably one of most expensive.
Steyr-Solothurn S1-100 submachine gun was blowback operated, selective-fired weapon which fired from open bolt. Unlike most other submachine guns, the return spring was located in the buttstock and was linked to bolt via long push-rod, pivotally attached to the rear of the bolt. The basic action of the gun was accessible through the top cover, which was hinged at the front and opened up and forward to expose bolt and trigger unit below it. The fire mode selector was made in the form of a sliding switch, located at the left side of the stock. Early guns had Schmeisser-style bolt-locking safety in the form of hook-shaped cut which was used to engage the bolt handle when bolt was cocked. Later on, additional manual safety was added to the top cover, in front of the rear sight. this safety locked bolt either in cocked or closed position. The feed was from left side, with magazine housing slightly canted forward for more positive feeding Ejection was to the right. The magazine housing had an unusual magazine filler device, with slots for magazine at the bottom and for stripper clip - at the top. removed magazine was inserted into this device from the bottom, and then shooter placed stripper clips into the top of device and pushed cartridges down into magazine. Four standard 8-round clips were required to fill the magazine.
All S1-100 guns were fitted with wooden stock with semi-pistol grip. Barrel was enclosed into perforated jacket, which had provisions for mounting a bayonet. Sights included hooded front and tangent type rear, marked from 100 to 500 meters. One most unusual accessory, which was briefly advertised for S1-100 during mid-1930s, was a compact machine-gun type tripod, which was to provide additional stability for weapon when firing from ground. It seems that this tripod was never made in quantity.

Halcon ML-63

Halcon ML-63 submachine gun.
Halcon ML-63 submachine gun.

Characteristics

Caliber 9x19mm Luger / Parabellum
Weight 3.6 kg
Length (stock closed/open) 500 / 690 mm
Barrel length 170 mm
Rate of fire 600 rounds per minute
Magazine capacity 20 or 42 rounds

Halcon ML-63 submachine gun (Pistola ametralladora Halcón, Modelo Liviano 1963) was developed in 1963 by Argentinean arms-making company Fabrica de Armas Halcon. This weapon saw extensive use by Argentinean armed forces during conflict with Great Britain over Falkland islands. It was also used by Argentinean police until early 1990s.
Halcon ML-63 submachine gun is a simple blowback weapon that fires from closed bolt.It has a sliding "hammer' or striker, which is cocked when bolt closes, and is released when trigger is pressed. It has dual trigger setup, which allows to fire either single shots (front trigger) or full automatic (rear trigger). Charging handle is located on the right side and moves along with the bolt. Weapon is manufactured mostly from steel stampings, and fitted with plain barrel that has a massive muzzle compensator. Magazine housing is extended to provide comfortable forward grip for non-firing hand.  Halcon ML-63 submachine gun was usually equipped with simple telescoping buttstock, made of steel wire, although it can be replaced with detachable fixed wooden butt. Standard iron sights feature L-shaped flip-up rear sight with settings for 50 and 100 meters range.

Halcon M/943

Halcon M/943 submachine gun.
Halcon M/943 submachine gun.

Characteristics

Caliber .45ACP
Weight 4.05 kg
Length 850 mm
Barrel length 292 mm
Rate of fire 700 rounds per minute
Magazine capacity 17 or 30 rounds

Halcon M/943 submachine gun (Pistola ametralladora Halcón, modelo 1943) was developed by Argentinean arms-making company Fabrica de Armas Halcon. It was manufactured for Argentinean army and police; lighter and more compact variant of the same weapon was manufactured as Halcon M/946 for Argentinean Air Forces (Carabina ametralladora Halcón, modelo Aeronáutica Argentina 1946). This weapon is rarely encountered outside of South America.
The Halcon M/943 submachine gun is a simple blowback weapon that fires from open bolt. Weapon can fire single shots and full automatic, thanks to the fire mode selector, located on the left side above the trigger. Charging handle is also located on the left side and does not move when gun is fired. Halcon M/943 submachine gun is fitted with heavily finned barrel and a massive muzzle compensator, and has a wooden pistol grip / buttstock of peculiar shape. The Halcon M/946 submachine gun was similar in design except that it had a shorter barrel and a MP40-type underfolding buttstock.

 
Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | Online Project management